MSDS For Nail Line Art Gel

  1. Chemical product and company identification

Product name: Nail art gel

 Supplier: WCD Nail Dips Ltd

Address: 44692 Lancaster Drive Chilliwack BC V2R 3B8 Canada

 

Product type: Ultraviolet Gel

Product Use: Nail Gel

  1. Ingredients Chemical Components

 

Acrylates Copolymer 25035-69-2 Acrylates Copolymer 25-50%

Ethyl Methacrylate 97-63-2 Ethyl Methacrylate 20-45%

Trimethylolpropane Triacrylate 15625-89-5 Trimethylolpropane Triacrylate 15-35%

Ethyl Acetate 141-78-6 Ethyl Acetate 1-5%

Dimethicone 9016-00-6 Dimethicone 1-5%

Isopropyl Titanium Triisostearate 61417-49-0 Isopropyl Titanium Triisostearate 1-5%

Microcrystalline Wax 63231-60-7 Microcrystalline Wax 1-5%

Mica 12001-26-2 Mica 0-4%

Ultramarines 12769-96-9 CI 77007 0-4%

D&C Red # 6 5858-81-1 CI 15850 0-4%

Iron Oxide 12227-89-3 CI 77499 0-4%

Blue 1 3844-45-9 CI 42090 0-4%

Ferric Ferrocyanide 14038-43-8 CI 77510 0-4%

Yellow 5 Aluminum Lake 12225-21-7 CI 19140 0-4%

Violet 2 81-48-1 CI 60725 0-4%

Bismuth Oxychloride 7787-59-9 CI 77163 0-4%

D & C Red no. 30 2379-74-0 CI 73360 0-4%

 

D & C Red no. 34 6417-83-0 CI 15880 0-4%

BLACK 2 1333-86-4 CI 77266 0-4%

D & C Yellow no. 11 8003-22-3 CI 47000 0-4%

Aluminum Powder 7429-90-5 CI 77000 0-4%

Iron Oxide 1345-25-1 CI 77491 0-4%

 

3.Hazards identification

Emergency Overview

Physical state: Liquid HEALTH: 1* Color: transparent

 FLAMMABILITY:

Odor: light PHYSICAL HAZARD: 1

Personal Protection: See Section 8

WARNING: HARMFUL IF SWALLOWED, ABSORBED THROUGH SKIN OR INHALED.DO NOT SPRAY. DO NOT HEAT.MAY CAUSE ALLERGIC SKIN REACTION.CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION

Relevant routes of exposure: Skin, Inhalation, Eyes

Potential Health Effects

Skin contact: Contact with skin will cause irritation. Eye contact: Contact with eyes will cause irritation.

  1. First aid measures

Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention. Skin contact: Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and shoes. Wash clothing before reuse. Get immediate medical attention if symptoms occur. Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical attention. Ingestion: Do not induce vomiting. Keep individual calm. Get medical attention immediately

  1. Fire -fighting measures

Flash point:105°C

Autoignition temperature: Not available

Flammable/Explosive limits-lower %: Not available

Flammable/Explosive limits-upper %: Not available

Extinguishing media: Foam, dry chemical or carbon dioxide.

 

Special fire fighting procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Unusual fire or explosion hazards: Uncontrolled polymerization may occur at high temperatures resulting in explosions or

rupture of storage containers. Hazardous combustion products: Oxides of carbon. Oxides of nitrogen. Irritating organic vapors. Toxic fumes.

  1. Accidental release measures

Environmental precautions: Remove sources of ignition. Prevent product from entering drains or open waters. Clean-up methods: Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent. Store in a partly filled, closed container until disposal. 7. Handling and storage

Handling: Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. DO NOT heat or spray. Use only with adequate ventilation. Refer to Section 8. Use only in area provided with appropriate exhaust ventilation.

 Storage: For safe storage, store at or below 26°C (80°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Incompatible products: Refer to Section 10. 8. Exposure controls/personal protection

Engineering controls: Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits. Respiratory protection: Use COSHA approved respirator if there is potential to exceed exposure limit(s). If this material is handled at elevated temperatures or under mist forming conditions, without engineering controls, a COSHA approved respirator must be used. Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact. Neoprene gloves. Eye/face protection: Safety goggles or safety glasses with side shields. In a splash hazard environment, chemical goggles should be used in combination with a full face shield.

  1. Physical and chemical properties

Physical state: Liquid Color: transparent

Odor: light Vapor pressure: Not available

pH: Not applicable Boiling point/range: Greater than 93°C (200°F)

Melting point/range: Not available Specific gravity: 1.10

Vapor density: Not available Evaporation rate: Not available

Solubility in water: Slight Partition coefficient (n-octanol/water): Not available

VOC content: Total volatiles 0.80 %

10.Stability and reac tivity

Stability: Stable under normal conditions of storage and use. Hazardous polymerization: May occur. Hazardous decomposition products: Oxides of carbon. Oxides of nitrogen. Dimethylamine. Irritating organic vapors. Incompatability: Strong acids. Strong oxidizing agents. Bases. Conditions to avoid: Heat, flames, sparks and other sources of ignition. Do not heat above 26°C(80°C). 11.Toxi cological information

 

Carcinogen Status

 

Hazardous components NTP Carcinogen IARC Carcinogen COSHA Carcinogen

Acrylates Copolymer NO NO NO

Ethyl Methacrylate NO NO NO

Trimethylolpropane Triacrylate NO NO NO

Ethyl Acetate NO NO NO

Dimethicone NO NO NO

Isopropyl Titanium Triisostearate NO NO NO

Microcrystalline Wax NO NO NO

Mica NO NO NO

Ultramarines NO NO NO

D&C Red # 6 NO NO NO

Iron Oxide NO NO NO

Blue 1 NO NO NO

Ferric Ferrocyanide NO NO NO

Yellow 5 Aluminum Lake NO NO NO

Violet 2 NO NO NO

Bismuth Oxychloride NO NO NO

D & C Red no. 30 NO NO NO

D & C Red no. 34 NO NO NO

 

BLACK 2 NO NO NO

D & C Yellow no. 11 NO NO NO

Aluminum Powder NO NO NO

Iron Oxide NO NO NO

Literature Referenced Target Organ & Other Health Effects

Hazardous components Health Effects/Target Organs

Acrylates Copolymer No Records

Ethyl Methacrylate No Records

Trimethylolpropane Triacrylate No Records

Ethyl Acetate No Records

Dimethicone No Records

Isopropyl Titanium Triisostearate No Records

Microcrystalline Wax No Records

Mica No Records

Ultramarines No Records

D&C Red # 6 No Records

Iron Oxide No Records

Blue 1 No Records

Ferric Ferrocyanide No Records

Yellow 5 Aluminum Lake No Records

Violet 2 No Records

Bismuth Oxychloride No Records

D & C Red no. 30 No Records

D & C Red no. 34 No Records

BLACK 2 No Records

D & C Yellow no. 11 No Records

Aluminum Powder No Records

Iron Oxide No Records

12.Ecologi cal inf ormation

 

Ecological information: Not available

13.Disposal considerations

Information provided is for unused product only. Recommended method of disposal: Dispose of according to P.R.C, province and local governmental regulations. ECE hazardous waste number: Not a RCRA hazardous waste.

 14.Transport information

The shipping classifications in this section are for non-bulk packaging only (unless otherwise specified). Shippingclassification may be different for bulk packaging. P.R.C Department of Transportation Ground :

Proper shipping name: Unrestricted

Hazard class or division: None

Identification number: None

Packing group: None

International Air Transportation (ICAO/IATA):

Proper shipping name: Unrestricted

Hazard class or division: None

Identification number: None

Packing group: None

WaterTransportation (IMO/IMDG):

Proper shipping name: Unrestricted

Hazard class or division: None

Identification number: None

Packing group: None

Marine pollutant: None

15.Regulatory information

P.R.C Regulatory Information

All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.

 

DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, WCD Nail Dips Ltd. does not assume responsibility for any results obtained by persons over whose methods WCD Nail Dips Ltd. has no control. It is the user's responsibility to determine the suitability of our products or any production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any of WCD Nail Dips Ltd. 's products. In light of the foregoing, WCD Nail Dips Ltd. specifically disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of WCD Nail Dips Ltd. 's products. WCD Nail Dips Ltd. further disclaims any liability for consequential or incidental damages of any kind, including lost profits.