MSDS For Builder Gel
Chemical product and company identification
Product name: Builder Gel
Supplier : WCD Nail Dips Ltd
Address: 44692 Lancaster Drive Chilliwack, BC V2R 3B8
Product type: Ultraviolet Gel
Product Use: Nail Gel
- Ingredients:
Chemical Components CAS NO INCI NO Concentration WT%
Acrylates Copolymer 25035-69-2 Acrylates Copolymer 30-55%
Trimethylolpropane Triacrylate 15625-89-5 Trimethylolpropane Triacrylate 15-30%
Ethyl Methacrylate 97-63-2 Ethyl Methacrylate 10-30%
Ethyl Acetate 141-78-6 Ethyl Acetate 5-10%
Dimethicone 9016-00-6 Dimethicone 2-5%
Microcrystalline Wax 63231-60-7 Microcrystalline Wax 1-5%
Aluminum Powder 7429-90-5 CI 77000 0-5%
Mica 12001-26-2 Mica 0-2%
Iron Oxide 12227-89-3 CI 77499 0-2%
Ferric Ferrocyanide 14038-43-8 CI 77510 0-2%
Yellow 5 12225-21-7 CI 19140 0-2%
Bismuth Oxychloride 7787-59-9 CI 77163 0-2%
BLACK 2 1333-86-4 CI 77266 0-2%
Iron Oxide 1345-25-1 CI 77491 0-2%
Titanium Dioxide 13463-67-7 CI 77891 0-2%
3.Hazards identification
Emergency Overview
Physical state: Liquid HEALTH: 1*
Color: transparent FLAMMABILITY: 2
Odor: light PHYSICAL HAZARD: 1
Personal Protection: See Section 8
WARNING: HARMFUL IF SWALLOWED, ABSORBED THROUGH SKIN OR INHALED.DO NOT
SPRAY. DO NOT HEAT.MAY CAUSE ALLERGIC SKIN REACTION, EYE, SKIN AND
RESPIRATORY TRACT IRRITATION
Relevant routes of exposure: Skin, Inhalation, Eyes
Potential Health Effects
Skin contact: Contact skin will cause irritation. Eye contact: Contact with eyes will cause irritation.
- First aid measures
Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention.
Skin contact: Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and shoes. Wash clothing before reuse. Get immediate medical attention if symptoms occur.
Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical attention.
Ingestion: Do not induce vomiting. Keep individual calm. Get medical attention immediately
- Fire-fighting measures
Flash point:105°C
Autoignition temperature: Not available
Flammable/Explosive limits-lower %: Not available
Flammable/Explosive limits-upper %: Not available
Extinguishing media: Foam, dry chemical or carbon dioxide. Special fire fighting procedures: Wear self-contained breathing apparatus and full protective clothing, such
as turn-out gear. Unusual fire or explosion hazards: Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers. Hazardous combustion products: Oxides of carbon. Oxides of nitrogen. Irritating organic vapors. Toxic fumes.
- Accidental release measures
Environmental precautions: Remove sources of ignition. Prevent product from entering drains or open waters.
Clean-up methods: Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent. Store in a partly filled, closed container until disposal. 7. Handling and storage
Handling: Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. DO NOT heat or spray. Use only with adequate ventilation. Refer to Section 8.
Use only in area provided with appropriate exhaust ventilation.
Storage: For safe storage, store at or below 26°C (80°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Incompatible products: Refer to Section 10.
- Exposure controls/personal protection
Engineering controls: Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits.
Respiratory protection: Use COSHA approved respirator if there is potential to exceed exposure limit(s). If this material is handled at elevated temperatures or under mist forming conditions, without engineering controls, a COSHA approved respirator must be used.
Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact. Neoprene gloves. Eye/face protection: Safety goggles or safety glasses with side shields. In a splash hazard environment, chemical goggles should be used in combination with a full face shield.
- Physical and chemical properties
Physical state: Liquid Color: transparent
Odor: light Vapor pressure: Not available
pH: Not applicable Boiling point/range: Greater than 93°C (200°F)
Melting point/range: Not available Specific gravity: 1.10
Vapor density: Not available Evaporation rate: Not available
Solubility in water: Slight Partition coefficient (n-octanol/water): Not available
VOC content: Total volatiles 0.80 %
10.Stability and reactivity
Stability: Stable under normal conditions of storage and use. Hazardous polymerization: May occur. Hazardous decomposition products: Oxides of carbon. Oxides of nitrogen. Dimethylamine. Irritating organic vapors. Incompatability: Strong acids. Strong oxidizing agents. Bases. Conditions to avoid: Heat, flames, sparks and other sources of ignition. Do not heat above 26°C(80°C). 11.Toxicological information
Carcinogen Status
Hazardous components NTP Carcinogen IARC Carcinogen COSHA Carcinogen
Acrylates Copolymer NO NO NO
Trimethylolpropane Triacrylate NO NO NO
Ethyl Methacrylate NO NO NO
Ethyl Acetate NO NO NO
Dimethicone NO NO NO
Microcrystalline Wax NO NO NO
Aluminum Powder NO NO NO
Mica NO NO NO
Iron Oxide NO NO NO
Ferric Ferrocyanide NO NO NO
Yellow 5 NO NO NO
Bismuth Oxychloride NO NO NO
BLACK 2 NO NO NO
Iron Oxide NO NO NO
Titanium Dioxide NO NO NO
Literature Referenced Target Organ & Other Health Effects
Hazardous components Health Effects/Target Organs
Acrylates Copolymer No Records
Trimethylolpropane Triacrylate No Records
Ethyl Methacrylate No Records
Ethyl Acetate No Records
Dimethicone No Records
Microcrystalline Wax No Records
Aluminum Powder No Records
Mica No Records
Iron Oxide No Records
Ferric Ferrocyanide No Records
Yellow 5 No Records
Bismuth Oxychloride No Records
BLACK 2 No Records
Iron Oxide No Records
Titanium Dioxide No Records
12.Ecological information
Ecological information: Not available
13.Disposal considerations
Information provided is for unused product only. Recommended method of disposal: Dispose of according to P.R.C, province and local governmental
regulations. ECE hazardous waste number: Not a RCRA hazardous waste. 14.Transport information
The shipping classifications in this section are for non-bulk packaging only (unless otherwise specified). Shipping classification may be different for bulk packaging. P.R.C Department of Transportation Ground or AIr
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
International Air Transportation (ICAO/IATA):
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
Water Transportation (IMO/IMDG):
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
Marine pollutant: None
15.Regulatory information
P.R.C Regulatory Information
All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.
DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, WCD Nail Dips Ltd. does not assume responsibility for any results obtained by persons over whose methods WCD Nail Dips Ltd. has no control. It is the user's responsibility to determine the suitability of our products or any production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any of WCD Nail Dips Ltd. 's products. In light of the foregoing, WCD Nail Dips Ltd. specifically disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of WCD Nail Dips Ltd. 's products. WCD Nail Dips Ltd. further disclaims any liability for consequential or incidental damages of any kind, including lost profits.