MSDS Gel Base, Matte Top, Quartz Top, 1-Step Gel Polishes

Chemical product and company identification

Product name: Quartz Ultra Shine Gel Top Coat,

Matte Top Coat, Gel Base Coat, 1-Step Gel Polish

Supplier : WCD Nail Dips Ltd

Address: 44692 Lancaster Drive Chilliwack, BC V2R 3B8

 

 

  1. Ingredients

2-Propenoic acid, 2methyl, polymer with ethal 2-propnoate CAS. 25212-88-8 Conc. 50-70%

2-Hydroxyethyl METHACRYLATE (HEMA) CAS. 868-77-9 CONC. 5-20%

UV Initiating agent CAS. 3896-11-5 CONC. 3-5%

Titanium Dioxide CAS. 13463-67-7 Conc. 0-3%

Iron Oxide Black CAS. 12227-89-3 Conc. 0-2%

Copper phthalocyanine CAS. 147-14-8 Conc. 0-2%

Pigment Yellow 42 CAS. 51274-00-1 Conc. 0-2%

Natural Iron Oxide CAS. 1345-27-3 Conc. 0-2%

Inorganic pigment CAS. / Conc. 0-2%

 

3.Hazards identification

OSHA/HCS status: This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200 flammable, eye irritant

Physical state: Liquid* Color: Varies

FLAMMABILITY: 2

Odor: Heavy  PHYSICAL HAZARD: 1

Personal Protection: See Section 8

WARNING: HARMFUL IF SWALLOWED, ABSORBED THROUGH SKIN OR INHALED.DO NOT SPRAY. DO NOT HEAT.MAY CAUSE ALLERGIC SKIN REACTION.CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION

Relevant routes of exposure: Skin, Inhalation, Eyes

Potential Health Effects

Skin contact: Skin contact may cause irritation. Eye contact: Contact with eyes will cause irritation.

  1. First aid measures

Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention.

Skin contact: Wash skin with plenty of water (using soap, if available). Remove contaminated clothing and shoes. Wash clothing before reuse. Get immediate medical attention if symptoms occur.

 Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical attention.

 Ingestion: Do not induce vomiting. Keep individual calm. Get medical attention immediately

  1. Fi r e -fighting measure s

Autoignition temperature: Not available

Flammable/Explosive limits-lower %: Not available

Flammable/Explosive limits-upper %: Not available

Flammable

Extinguishing media: Foam, dry chemical or carbon dioxide., water, water mist.

 Special fire fighting procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Unusual fire or explosion hazards Hazardous combustion products: Oxides of carbon. Oxides of nitrogen. Irritating organic vapors. Toxic fumes. 6. Accidental release measures

Environmental precautions: Remove sources of ignition. Prevent product from entering drains or open waters. Clean-up methods: Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent. Store in a partly filled, closed container until disposal.

  1. Handling and storage

Handling: Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. DO NOT heat or spray. Use only with adequate ventilation. Refer to Section 8. Use only in area provided with appropriate exhaust ventilation. Keep away from heat and direct sunlight. Storage: For safe storage, store at or below 26°C (80°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Store in original container. Keep container tightly closed until ready for use. Incompatible products: Refer to Section 10. Do not eat, drink or smoke in the areas where this material is handled or stored.

 

  1. Exposure controls/personal protection

Engineering controls: Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits. Respiratory protection: Use COSHA approved respirator if there is potential to exceed exposure limit(s). If this material is handled at elevated temperatures or under mist forming conditions, without engineering controls, a COSHA approved respirator must be used. Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact. Neoprene gloves. Eye/face protection: Safety goggles or safety glasses with side shields. In a splash hazard environment, chemical goggles should be used in combination with a full face shield.

Personal, Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reusing.

 

  1. Physical and chemical properties

Physical state: Liquid Color: Varies

Odor: Light

Vapor pressure: Not available

pH: Not applicable

Melting point/range: Not available

Vapor density: Not available Evaporation rate: Not available

10.Stability and reactivity

Stability: Stable under normal conditions of storage and use. Incompatability: Strong acids. Strong oxidizing agent, acid and alkali. Bases. Conditions to avoid: Heat, flames, sparks and other sources of ignition. Do not heat above 26°C(80°C).

 

12.Ecological information

Ecological information: Not available

13.Disposal considerations

Information provided is for unused product only. Recommended method of disposal: Dispose of according to P.R.C, province and local governmental regulations. ECE hazardous waste number: Not a RCRA hazardous waste.

14.Transport information

The shipping classifications in this section are for non-bulk packaging only (unless otherwise specified). Shipping classification may be different for bulk packaging. P.R.C Department of Transportation

 Ground :

Proper shipping name: Unrestricted

Hazard class or division: None

Identification number: None

Packing group: None

 

International Air Transportation (ICAO/IATA):

Proper shipping name: Unrestricted

Hazard class or division: None

Identification number: None

Packing group: None

Water Transportation (IMO/IMDG):

Proper shipping name: Unrestricted

Hazard class or division: None

Identification number: None

Packing group: None

Marine pollutant: None

15.Regulatory information

P.R.C Regulatory Information

All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.

DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, WCD Nail Dips Ltd. does not assume responsibility for any results obtained by persons over whose methods WCD Nail Dips Ltd. has no control. It is the user's responsibility to determine the suitability of our products or any production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any of WCD Nail Dips Ltd. 's products. In light of the foregoing, WCD Nail Dips Ltd. specifically disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of WCD Nail Dips Ltd. 's products. WCD Nail Dips Ltd. further disclaims any liability for consequential or incidental damages of any kind, including lost profits.