MSDS For Super Stick Gelly Glue

WCD Nail Dips Ltd Material Safety Data Sheet

Chemical product and company identification

Product name: Super Stick Glue	^{Distributor: WCD Nail Dips Ltd}
Product No: WCGT0013	Address:44692 Lancaster Dr, Chilliwack Bc
Product type: Ultraviolet Gel	Telephone: 778-233-4170
Product Use: Nail Gel

2. Ingredients

Chemical Components	CAS	NO INCI NO Concentration	WT%
Acrylates Copolymer	25035-69-2	Acrylates Copolymer	10-30
Polymethyl methacrylate	9011-14-7	Polymethyl Methacrylate	10-30
Polyethylene terephthalate	25038-59-9	Polyethylene Terephthalate	10-30
Trimethylolpropane Triacrylate	15625-89-5	Trimethylolpropane Triacrylate	10-30
Dimethicone	9016-00-6	Dimethicone	2-8
Microcrystalline Wax	63231-60-7	Microcrystalline Wax	1-5

3.Hazards identification

Emergency Overview

Physical state: Liquid

HEALTH:

1* Color: transparent

FLAMMABILITY:

2 Odor: light PHYSICAL HAZARD: 1

Personal Protection: See Section 8

WARNING: HARMFUL IF SWALLOWED, ABSORBED THROUGH SKIN OR INHALED.DO NOT SPRAY. DO NOT HEAT.MAY CAUSE ALLERGIC SKIN REACTION.CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION

Relevant routes of exposure: Skin, Inhalation, Eyes

Potential Health Effect

Skin contact: Contact skin will cause irritation.

Eye contact: Contact with eyes will cause irritation.

4. First aid measures

Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention.

Skin contact: Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and shoes. Wash clothing before reuse. Get immediate medical attention if symptoms occur.

Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical attention.

Ingestion: Do not induce vomiting. Keep the individual calm. Get medical attention immediately.

5.Fire-fighting measures

Flash point:105°C

Autoignition temperature: Not available

Flammable/Explosive limits-lower %: Not available

Flammable/Explosive limits-upper %: Not available

Extinguishing media: Foam, dry chemical or carbon dioxide.

Special fire fighting procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

Unusual fire or explosion hazards: Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.

Hazardous combustion products: Oxides of carbon. Oxides of nitrogen. Irritating organic vapors. Toxic Fumes.

6. Accidental release measures

Environmental precautions: Remove sources of ignition. Prevent product from entering drains or open waters.

Clean-up methods: Refer to Section 8 "Exposure Controls / Personal Protection" prior to cleanup. Soak Up With inert absorbent. Store in a partly filled, closed container until disposal.

7. Handling and storage

Handling: Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. DO NOT heat or spray. Use only with adequate ventilation. Refer to Section 8. Use only in area provided with appropriate exhaust ventilation.

Storage: For safe storage, store at or below 26°C (80°F). Keep in a cool, well ventilated area away from heat,sparks and open flame. Keep the container tightly closed until ready for use.

Incompatible products: Refer to Section 10.

8. Exposure controls/personal protection

Engineering controls: Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits.

Respiratory protection: Use COSHA approved respirator if there is potential to exceed exposure limit(s).If this material is handled at elevated temperatures or under mist forming conditions, without engineering controls, a COSHA approved respirator must be used.

Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact. Neoprene gloves.

Eye/face protection: Safety goggles or safety glasses with side shields. In a splash hazard environment, chemical goggles should be used in combination with a full face shield.

9. Physical and chemical properties

Physical state: Liquid Color: transparent

Odor: light Vapor pressure: Not available pH: Not applicable Boiling point/range: Greater than 93°C(200°F)Melting point/range: Not available Specific gravity: 1.10 Vapor density: Not available Evaporation rate: Not available Solubility in water: Slight Partition coefficient (n-octanol/water): Not availableVOC content: Total volatiles 0.80 %

10.Stability and reactivity

Stability: Stable under normal conditions of storage and use.

Hazardous polymerization: May occur.

Hazardous decomposition products: Oxides of carbon. Oxides of nitrogen. Dimethylamine. Irritating Organic vapors.

Incompatibility: Strong acids. Strong oxidizing agents. Bases.

Conditions to avoid: Heat, flames, sparks and other sources of ignition. Do not heat above 26°C(80°C). 11.Toxicological information

Carcinogen Status

Hazardous components	NTP Carcinogen	IARC	Carcinogen COSHA Carcinogen
Acrylates Copolymer	NO	NO	NO
Ethyl Methacrylate	NO	NO	NO
Polymethyl methacrylate	NO	NO	NO
Polyethylene terephthalate	NO	NO	NO
Trimethylolpropane Triacrylate	NO	NO	NO
Dimethicone	NO	NO	NO
Microcrystalline Wax	NO	NO	NO

Literature Referenced Target Organ & Other Health Effects

Hazardous components	Health Effects/Target Organs
Acrylates Copolymer	No Records
Ethyl Methacrylate	No Records
Polymethyl methacrylate	No Records
Polyethylene terephthalate	No Records
Trimethylolpropane Triacrylate	No Records
Dimethicone	No Records
Microcrystalline Wax	No Records

12.Ecological information

Ecological information: Not available

13.Disposal considerations

Information provided is for unused product only.

Recommended method of disposal: Dispose of according to P.R.C, province and local governmental regulations.

ECE hazardous waste number: Not a RCRA hazardous waste.

14.Transport information

The shipping classifications in this section are for non-bulk packaging only (unless otherwise specified).Shipping classification may be different for bulk packaging.

P.R.C Department of Transportation Ground :

Proper shipping name: Unrestricted

Hazard class or division: None

Identification number: None

Packing group: None

International Air Transportation (ICAO/IATA):

Proper shipping name: Unrestricted

Hazard class or division: None

Identification number: None

Packing group: None

WaterTransportation (IMO/IMDG):

Proper shipping name: Unrestricted

Hazard class or division: None

Identification number: None

Packing group: None

Marine pollutant: None

15.Regulatory information

P.R.CRegulatory Information

All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory. DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, WCD Nail Dips Ltd. does not assume responsibility for results obtained by persons over whose methods WCD Nail Dips Ltd has no control. It is the user's responsibility to determine the suitability of our products or any production methods mentioned herein for a particular

purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any of WCD Nail Dips Ltd products. In light of the foregoing, WCD Nail Dips Ltd specifically disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of WCD Nail Dips Ltd products. WCD Nail Dips Ltd further disclaims any liability for consequential or incidental damages of any kind, including lost profits.